Brick Paver Parking Area off Driveway is Restored

Neglected pavers are given repair, cleaning, and sanding in Ann Arbor

Brick Paver Parking Areas or Driveway Strips are a popular use for interlocking brick pavers.  This pavers area off the side of a cement driveway had been left for dead by the homeowner.  In its day, it was used to give additional area of parking for their teenager's vehicles and added space around the basketball net.  But as the children went off to college and no one was playing basketball any longer, this brick paver area was severely neglected.


The homeowner originally wanted to remove the pavers altogether and establish lawn in the area .  After weighing the pricing option of having this brick paver parking area restored to its original beauty & function, they felt that repairing it for the additional nominal cost would better meet their needs.  They still needed the additional parking area for returning college students and visiting guests.


This brick pavers installation was totally lifted up. The existing base material was leveled & re-compacted.  Additional base material was added to eliminate rutted and sunken areas and also compacted.  The proper pitches and finishing heights were determined and the old existing brick pavers were relaid in the approximately the same design, shape, & dimensions.


The old basketball pole & back board was removed and the hole was properly filled & compacted.  The removal of the basketball pole made this area much easier to access for vehicles.  After finishing with paver joint sand and compacting with a power plate compactor, the rejuvenated brick paver parking area had become alive again!


Most of our clients are surprised by the results of a total pavers restoration project at a nominal cost versus replacing with another pavement or landscape product.  Hiring a qualified and experienced brick paver contractor can be very rewarding when deciding to restore versus replacement.  This has always been the special asset of having brick pavers installed in the first place!

Restoration of Brick Pavers Walkway installed 10 years ago

Simple paver maintenance will help avoid repairs and major restoration

This brick pavers walkway in Ann Arbor was recently restored by our company. The condition of this paver walk is a common occurrence that I estimate restoration for on a daily basis.  It was a reminder to me that neglect of simple routine paver maintenance will turn into a major restoration cost in the future.

This pavers walkway had never received any additional sweeping of joint sand since it was installed 10 years ago!  Who is to fault?  Neglect by the homeowner? or the lack of educating the homeowner by the installing contractor?  Either way, the homeowner is now responsible for the cost to restore this pavers walk.

The 2 contributing factors to the deterioration of this pavers walkway was the lack of paver joint sand in the paver joints and the exposure of the cement bead edge restraint.  If these simple maintenance requirements had been addressed, the homeowner would not have the cost of complete re-installation of this paver walkway.

The lack of keeping joint sand in the paver joints allows for water to take the least path of resistance.  Water will rush down the joints instead of running over the paver surface.  The result is the base below slowly erodes over time and allows the paving stones to sink, tilt, or loosen.  Joint sand also is the key factor in keeping the pavers "locked-up" and tight.  Lack of paver joint sand will allow the paving stones to loosen, gap, tilt, and shift.

The lack of the cement bead edge restraint being covered by proper landscaping (i.e. soils, grass, or mulch) allows the edge restraint to erode, crack, and break loose.  In turn, the outside row of pavers begin to "creep" out.  The result is the inner paving stones begin to excessively gap, loosen, and tilt.  I was amazed after 10 years that the cement bead edge restraint was totally exposed.  All the homeowner had to do was allow the grass to grow over the cement bead on the lawn side with a few bags of topsoil & seed and cover with mulch on the inside landscape bed.

We completely lifted up this pavers walkway, re-compacted the existing base, added new base material as needed to re-level, re-installed the pavers in like shape & design, cleaned the pavers, and swept in new pavers joint sand.  The homeowner also elected to have the paver walk sealed to enhance the color and give it the "wet look" appearance. The final result was another successful house call by the Doctor and staff!

Pavers Patio Replaces Old Concrete Patio in Canton, MI

Brick Pavers create a new Beautiful & Functional Patio and Step

The number one request we receive when installing brick pavers is replacing old, cracked, sunken, and deteriorated concrete patios, steps, and walks.  In Canton, MI this month we replaced this unsightly cement patio that drastically sloped back to the house, resulting in water problems around the foundation.  Because the cement patio had sunk, the rise on the cement step was over 12" and causing a safety issue.  It was time for the homeowner to address this unsightly and unsafe outdoor living space.

The homeowner was referred to us by a couple of clients that we had installed pavers patios for over the past few years.  The homeowner did get a couple of quotes from other brick paver contractors in the local area but they did not compare to us in ideas, dependability, and confidence.  Our price was in the middle of the 2 other contractors but the homeowner had complete confidence in our expertise and professionalism.  We did not disappoint!

After removing the old concrete patio & step, we prepped the base material and established the new height of the pavers patio and step.  Not only did we create the proper pitch from the house foundation, but we built the new pavers patio slightly above grade (yard level) to allow proper drainage off the patio.  Using extra base material to set the height, the patio had the appearance of a raised pavers patio without the cost of installing a retaining wall block & cap.

We transitioned the height of the pavers patio with the existing lawn height by stripping an additional 3-4ft of lawn.  We installed topsoil from the outside row of pavers gradually down to the lawn height. This created a new raised landscape bed for the customer to plant dwarf bushes, perennials, or annuals and cover with an organic mulch or stone mulch.  We also installed some flagstone paths off the pavers patio through the landscape beds to allow access into the yard.  You can just install grass, sod or seed, instead of a landscape bed but keep in mind it will have some slope.

The new pavers step was constructed with solid modular retaining wall block & caps.  This helps prevent any ongoing repair to brick paver inlays.  The only drawback is your paver steps or landing must be rectangular and not curved.  We created comfortable and safe 7" rises from the doorwall down to the paver block step and from the paver block step down to the pavers patio.

The homeowner took advantage of increasing the size of the new pavers patio to better facilitate there outdoor living space needs.  The popular "kidney" shaped design met their needs while softening the angles on the home.  The actual size of the patio was determined by placing all the furniture, grill, fire pit, etc.. out and outlining the needed space.  The outline can be executed by using marking paint, stakes, or the garden hose.

We properly installed this new pavers patio and step by meeting or exceeding all industry specifications of installing brick pavers.  The design was both aesthetically pleasing and functional.  The homeowner was educated on future maintenance requirements to insure long-term performance.  The end result was a completely satisfied homeowner and a proud brick pavers owner & crew!